_/qmk_firmware
1
0
Fork 0
Code Releases Activity
qmk_firmware/keyboards/tada68
History
mtdjr ee9a7aba39 add not-so-minidox handwire keyboard (#3061) 
* add not-so-minidox handwire keyboard

* corrected keymap

* multiple adjustments to not_so_minidox keyboard

* remove I2C master left define

* update default layer set function

* move solenoid code into userspace

* minor adjustments to config.h

* update keymaps to utilize userspace

* move features and config to userspace, correct build issue

* correct solenoid pin

* adjust defaults for solenoid pin and enable

* default solenoid to on for not_so_minidox

* disable RGBLIGHT_SLEEP for xd75

* tweaking solenoid enable/disable in userspace and keymaps
2018-05-31 08:30:05 -07:00
..
keymaps add not-so-minidox handwire keyboard (#3061) 2018-05-31 08:30:05 -07:00
config.h Fixed arrow up and rgb config 2017-07-05 11:48:19 -04:00
info.json QMK Configurator updates to Tada68 (#2825) 2018-04-27 15:44:33 -07:00
readme.md Fixed dead links (#2451) 2018-03-01 07:45:47 -08:00
rules.mk Added support for RGB on the Tada68 2017-07-05 11:48:19 -04:00
tada68.c Added some user customization 2017-07-20 10:18:00 -04:00
tada68.h Added Iso(ish) layout for tada68. (#1924) 2017-10-29 15:22:07 -07:00

readme.md

TADA68

A compact 65% keyboard.

Keyboard Maintainer: QMK Community Hardware Supported: TADA68 PCB Hardware Availability: kbdfans kbdist

Make example for this keyboard (after setting up your build environment):

make tada68:default:bin

See build environment setup then the make instructions for more information.

Flashing Instructions

*Read all the instructions, there are a few warnings of things to avoid doing to avoid bricking your Tada68. _It is much too easy to do! _

  1. from the qmk_firmware\ directory run:
$ make tada68:default:flashbin

  1. Connect your keyboard to Windows computer, hit the reset button on the TADA, the lights will start flashing.

  2. You'll see a new drive on your computer called TADA68. Backup the original factory FLASH.BIN file thats inside it.

  3. Delete FLASH.BIN from the TADA drive and copy tada68_default.bin that was generated at the root of the qmk directory into the TADA drive.

  4. Do not eject the USB device. Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!