1
0
Fork 0
qmk_firmware/keyboards/fc660c
Balz Guenat eeb6443767 actuation point adjustment for fc980c and fc660c (#2134)
* add i2c lib submodule

* add actuation point adjustment to fc980c

* add actuation point adjustment to fc660c also.

* use https for i2c submodule

* move to existing i2c lib

* properly remove old submodule

* oops, forgot some files for the fc660c
2017-12-11 21:05:12 -05:00
..
keymaps/default Fc660c port (#2060) 2017-11-26 02:17:14 -05:00
README.md actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
actuation_point.c actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
actuation_point.h actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
config.h actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
fc660c.c actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
fc660c.h Fc660c port (#2060) 2017-11-26 02:17:14 -05:00
i2c.c actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
i2c.h actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
matrix.c actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
rules.mk actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00

README.md

FC660C Alt Controller

This file and the entire QMK port of this board are based on its TMK implementation: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/fc980c


Make example for this keyboard (after setting up your build environment):

make fc660c:default

See build environment setup then the make instructions for more information.

To flash the firmware, press the reset button on the controller and run:

sudo make fc660c:default:dfu

Thread on Geekhack: https://geekhack.org/index.php?topic=88439.0

Also: https://geekhack.org/index.php?topic=88720.0

Actuation Point adjustment

You can adjust the actuation point of the keys by setting ACTUATION_DEPTH_ADJUSTMENT in config.h. A value above 0 will result in a deeper, less sensitive actuation whereas a value above 1 will result in a more shallow, more sensitive actuation. Be careful with this setting and use small values (+/-5). See the actuation-point-example keymap of the fc980c keyboard for an example. For more information, inspect the fc660c_i2c branch of TMK here. Functionality for writing to the EEPROM has deliberately not been included to reduce the chance of people messing up their boards.

Pinouts

|Switch  |Controller |
|  board |     board |Description                           |Schematic  |ATmega32u4
|--------|-----------|--------------------------------------|-----------|------------
| 1      |20         | FG                                   |FG         |GND
| 2      |19         | GND                                  |GND        |GND
| 3      |18         | GND                                  |GND        |GND
| 4      |17         | 3.3V                                 |V33        |3.3V/5V
| 5      |16         | 5V                                   |Vcc        |5V
| 6      |15         |*Z6-TP1684-4-HYS(o)                   |FBSTB      |PC7
| 7      |14         |*Z6-TP1684-2-KEY(i)                   |OUT        |PC6
| 8      |13         |*Z2-AD5258-5-SCL(I2C)                 |SCL        |PD0(TWI)
| 9      |12         |*Z2-AD5258-4-SDA(I2C)                 |SDA        |PD1(TWI)
|10      |11         |*Z4-LV4051A-6-~EN(Col 0-7)            |INH_1      |PB4
|11      |10         |*Z5-LV4051A-6-~EN(Col 8-F)            |INH_2      |PB3
|12      | 9         |+Z7-LV07A-5 (LV4051A-9-C)             |SEL_C      |PB2
|13      | 8         |+Z7-LV07A-1 (LV4051A-10-B)            |SEL_B      |PB1
|14      | 7         |+Z7-LV07A-3 (LV4051A-11-A)            |SEL_A      |PB0
|15      | 6         |+Z3-LVC138A-3-C                       |COL4       |PD6
|16      | 5         |+Z3-LVC138A-2-B                       |COL3       |PD5
|17      | 4         |+Z3-LVC138A-1-A                       |COL2       |PD4
|18      | 3         |+Z3-LVC138A-4-~G2A  Z6-TP1684-5-~EN   |COL1       |PD7
|19      | 2         |+Z7-LV07A-11-~InsertLED               |LED1       |PB5
|20      | 1         |+Z7-LV07A-13-~CapsLED                 |LED2       |PB6
* 5V intferface
+ 3.3V interface

Key Matrix

Row5-7 have no key, you can omit scaning on those lines. Topre original controller scans those rows for some reason.

|    |0   |1   |2   |3   |4   |5   |6   |7   |8   |9   |A   |B   |C   |D   |E   |F   |
|----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|
|   0|Q   |W   |E   |Tab |R   |U   |T   |Y   |O   |P   |[   |I   |]   |    |\   |Del |
|   1|1   |2   |3   |Esc |4   |7   |5   |6   |9   |0   |-   |8   |=   |    |BSpc|Ins |
|   2|    |LWin|LAlt|LCtl|    |    |    |Spc |RAlt|    |RCtl|    |Fn  |Down|Left|Rght|
|   3|    |Z   |X   |LSft|C   |N   |V   |B   |,   |.   |/   |M   |RSft|Up  |    |    |
|   4|A   |S   |D   |Caps|F   |J   |G   |H   |L   |;   |'   |K   |    |    |Entr|    |
|   5|    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |
|   6|    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |
|   7|    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |

Logic analyzer pics:

This code emuluates what original cotnroller does for matrix scan.

Row designation

LV138A(Z3) selects a row line and gives strobe by enabling with ~G2A(18).

|Row |A/17|B/16|C/15|
|----|----|----|----|
|0   |0   |0   |0   |
|1   |1   |0   |0   |
|2   |0   |1   |0   |
|3   |1   |1   |0   |
|4   |0   |0   |1   |
|5   |1   |0   |1   |
|6   |0   |1   |1   |
|7   |1   |1   |1   |

Column designation

LV4051A(Z4, Z5) select one of 16 column lines to sense capacitance of switches.

|Col |A/14|B/13|C/12|Z4-EN/10|Z5-EN/11|
|----|----|----|----|--------|--------|
|0   |0   |0   |0   |0       |1       |
|1   |1   |0   |0   |0       |1       |
|2   |0   |1   |0   |0       |1       |
|3   |1   |1   |0   |0       |1       |
|4   |0   |0   |1   |0       |1       |
|5   |1   |0   |1   |0       |1       |
|6   |0   |1   |1   |0       |1       |
|7   |1   |1   |1   |0       |1       |
|8   |0   |0   |0   |1       |0       |
|9   |1   |0   |0   |1       |0       |
|A   |0   |1   |0   |1       |0       |
|B   |1   |1   |0   |1       |0       |
|C   |0   |0   |1   |1       |0       |
|D   |1   |0   |1   |1       |0       |
|E   |0   |1   |1   |1       |0       |
|F   |1   |1   |1   |1       |0       |

FCC documents

https://fccid.io/RPKFC660C

Datasheets

3.3V power supply

LV07A and LVC138A are 5V-tolerant and can be powered with 5V, the keyboard will work only with 5V power supply. It may not be completely safe to operate LV138A with 5V Vcc, its datasheet says:

Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

Digipot AD5258

Controller can operate AD5258 via I2C to change actuation point of keys. This may make keyboard unusable accidentally and it will be difficult to recovery in some situation. For safety firmware doesn't support it at this point, though.

Lower value of RDAC register causes shallower actuation point.

Resources