1
0
Fork 0
qmk_firmware/keyboards/hhkb/rn42/rn42.c
Enochen f13ca59361 rn42 compilation error fix ()
* rn42 compile fix

Fixes a compilation error

* simpler rn42 compile fix

good idea drashna :)
2018-10-03 15:02:24 -07:00

265 lines
5.9 KiB
C

#include <avr/io.h>
#include "host.h"
#include "host_driver.h"
#include "../serial.h"
#include "rn42.h"
#include "print.h"
#include "timer.h"
#include "wait.h"
/* Host driver */
static uint8_t keyboard_leds(void);
static void send_keyboard(report_keyboard_t *report);
static void send_mouse(report_mouse_t *report);
static void send_system(uint16_t data);
static void send_consumer(uint16_t data);
host_driver_t rn42_driver = {
keyboard_leds,
send_keyboard,
send_mouse,
send_system,
send_consumer
};
void rn42_init(void)
{
// JTAG disable for PORT F. write JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
// PF7: BT connection control(high: connect, low: disconnect)
rn42_autoconnect();
// PF6: linked(input without pull-up)
DDRF &= ~(1<<6);
PORTF |= (1<<6);
// PF1: RTS(low: allowed to send, high: not allowed)
DDRF &= ~(1<<1);
PORTF &= ~(1<<1);
// PD5: CTS(low: allow to send, high:not allow)
DDRD |= (1<<5);
PORTD &= ~(1<<5);
serial_init();
}
int16_t rn42_getc(void)
{
return serial_recv2();
}
const char *rn42_gets(uint16_t timeout)
{
static char s[24];
uint16_t t = timer_read();
uint8_t i = 0;
int16_t c;
while (i < 23 && timer_elapsed(t) < timeout) {
if ((c = rn42_getc()) != -1) {
if ((char)c == '\r') continue;
if ((char)c == '\n') break;
s[i++] = c;
}
}
s[i] = '\0';
return s;
}
void rn42_putc(uint8_t c)
{
serial_send(c);
}
void rn42_puts(char *s)
{
while (*s)
serial_send(*s++);
}
bool rn42_autoconnecting(void)
{
// GPIO6 for control connection(high: auto connect, low: disconnect)
// Note that this needs config: SM,4(Auto-Connect DTR Mode)
return (PORTF & (1<<7) ? true : false);
}
void rn42_autoconnect(void)
{
// hi to auto connect
DDRF |= (1<<7);
PORTF |= (1<<7);
}
void rn42_disconnect(void)
{
// low to disconnect
DDRF |= (1<<7);
PORTF &= ~(1<<7);
}
bool rn42_rts(void)
{
// low when RN-42 is powered and ready to receive
return PINF&(1<<1);
}
void rn42_cts_hi(void)
{
// not allow to send
PORTD |= (1<<5);
}
void rn42_cts_lo(void)
{
// allow to send
PORTD &= ~(1<<5);
}
bool rn42_linked(void)
{
// RN-42 GPIO2
// Hi-Z: Not powered
// High: Linked
// Low: Connecting
return PINF&(1<<6);
}
static uint8_t leds = 0;
static uint8_t keyboard_leds(void) { return leds; }
void rn42_set_leds(uint8_t l) { leds = l; }
void rn42_send_str(const char *str)
{
uint8_t c;
while ((c = pgm_read_byte(str++)))
rn42_putc(c);
}
const char *rn42_send_command(const char *cmd)
{
static const char *s;
rn42_send_str(cmd);
wait_ms(500);
s = rn42_gets(100);
xprintf("%s\r\n", s);
rn42_print_response();
return s;
}
void rn42_print_response(void)
{
int16_t c;
while ((c = rn42_getc()) != -1) {
xprintf("%c", c);
}
}
static void send_keyboard(report_keyboard_t *report)
{
// wake from deep sleep
/*
PORTD |= (1<<5); // high
wait_ms(5);
PORTD &= ~(1<<5); // low
*/
serial_send(0xFD); // Raw report mode
serial_send(9); // length
serial_send(1); // descriptor type
serial_send(report->mods);
serial_send(0x00);
serial_send(report->keys[0]);
serial_send(report->keys[1]);
serial_send(report->keys[2]);
serial_send(report->keys[3]);
serial_send(report->keys[4]);
serial_send(report->keys[5]);
}
static void send_mouse(report_mouse_t *report)
{
// wake from deep sleep
/*
PORTD |= (1<<5); // high
wait_ms(5);
PORTD &= ~(1<<5); // low
*/
serial_send(0xFD); // Raw report mode
serial_send(5); // length
serial_send(2); // descriptor type
serial_send(report->buttons);
serial_send(report->x);
serial_send(report->y);
serial_send(report->v);
}
static void send_system(uint16_t data)
{
// Table 5-6 of RN-BT-DATA-UB
// 81,82,83 scan codes can be used?
}
static uint16_t usage2bits(uint16_t usage)
{
switch (usage) {
case AC_HOME: return 0x01;
case AL_EMAIL: return 0x02;
case AC_SEARCH: return 0x04;
//case AL_KBD_LAYOUT: return 0x08; // Apple virtual keybaord toggle
case AUDIO_VOL_UP: return 0x10;
case AUDIO_VOL_DOWN: return 0x20;
case AUDIO_MUTE: return 0x40;
case TRANSPORT_PLAY_PAUSE: return 0x80;
case TRANSPORT_NEXT_TRACK: return 0x100;
case TRANSPORT_PREV_TRACK: return 0x200;
case TRANSPORT_STOP: return 0x400;
case TRANSPORT_STOP_EJECT: return 0x800;
case TRANSPORT_FAST_FORWARD: return 0x1000;
case TRANSPORT_REWIND: return 0x2000;
//case return 0x4000; // Stop/eject
//case return 0x8000; // Internet browser
};
return 0;
}
static void send_consumer(uint16_t data)
{
uint16_t bits = usage2bits(data);
serial_send(0xFD); // Raw report mode
serial_send(3); // length
serial_send(3); // descriptor type
serial_send(bits&0xFF);
serial_send((bits>>8)&0xFF);
}
/* Null driver for config_mode */
static uint8_t config_keyboard_leds(void);
static void config_send_keyboard(report_keyboard_t *report);
static void config_send_mouse(report_mouse_t *report);
static void config_send_system(uint16_t data);
static void config_send_consumer(uint16_t data);
host_driver_t rn42_config_driver = {
config_keyboard_leds,
config_send_keyboard,
config_send_mouse,
config_send_system,
config_send_consumer
};
static uint8_t config_keyboard_leds(void) { return leds; }
static void config_send_keyboard(report_keyboard_t *report) {}
static void config_send_mouse(report_mouse_t *report) {}
static void config_send_system(uint16_t data) {}
static void config_send_consumer(uint16_t data) {}