72 lines
3.1 KiB
Text
72 lines
3.1 KiB
Text
// Sample options.txt configuration file for Pi1541
|
|
|
|
|
|
|
|
// If you would like to change the dirve number then spcity it here (8 is the default)
|
|
//deviceID = 9
|
|
|
|
// If you are using the split line hardware option (ie Option B) then you need to specify this option
|
|
//splitIECLines = 1
|
|
// If you are using some type of hardware that requires the lines to be inverted then specify these options here
|
|
//invertIECInputs = 1
|
|
//If you are using a 7407
|
|
//invertIECOutputs = 0
|
|
|
|
// If you are using the Pi's composite video out then these options allow you to experiment with the display resolution
|
|
//ScreenWidth = 512
|
|
//ScreenHeight = 384
|
|
|
|
// You can specify additional ROMS here (up to 10)
|
|
// You can then use the number keys on the keyboard to change which on you would like to use (only in browse more and not in emulation mode)
|
|
// .LST files can also specify one of these ROMS that will automatically selected when the LST file is loaded.
|
|
//ROM2 = Jiffy.bin
|
|
//ROM3 = d1541II
|
|
|
|
// Enable RAMBoard emulation - 8k drive RAM expansion at 0x8000
|
|
//RAMBOard = 1
|
|
|
|
//ChargenFont = chargen // 8 bit font file
|
|
|
|
// If using CBMFileBrowser then it is best to specify this option. When the computer resets the Pi will always revert back to the root folder ready to load CBMFileBrowser again.
|
|
OnResetChangeToStartingFolder = 1
|
|
|
|
// If you use FB64 (CBMFileBrowser) and want to use a fast loader cartridge (AR6, EFL, FC3) to load it then use this option to autmatically mount it.
|
|
//AutoMountImage = fb.d64
|
|
|
|
// If you would ever like to disable browse mode completely ypu can do so here
|
|
//DisableSD2IECCommands = 1
|
|
|
|
// This option displays the IEC bus activity on the bottom of the Pi's screen
|
|
GraphIEC = 1
|
|
|
|
// If you have hardware with a peizo buzzer (the type without a generator) then you can use this option to hear the head step
|
|
//SoundOnGPIO = 1
|
|
//SoundOnGPIODuration = 1000 // Length of buzz in micro seconds
|
|
//SoundOnGPIOFreq = 1200 // Frequency of buzz in Hz
|
|
|
|
// You can create 320x240 PNG files with the same name as your disk images. With this option turned on they will be displayed on the Pi's screen.
|
|
//DisplayPNGIcons = 1
|
|
|
|
// If you would like to specify what file will be loaded by LOAD"*" in browse mode then specify it here
|
|
//StarFileName = somefile
|
|
|
|
// If you are using a LCD screen then specify it here
|
|
//LCDName = ssd1306_128x64
|
|
// If you are using a LCD screen and you would like PageUp and PageDown keys to work with it then specify this option
|
|
//KeyboardBrowseLCDScreen = 1
|
|
|
|
// change startup logo on oled - 1541ii or 1541classic
|
|
//LcdLogoName = 1541ii
|
|
|
|
// If you are using I2C LCD you can optionally change what pins it is connected to.
|
|
// (defaults to 0 for non-split lines (Option A) or 1 for split lines (Option B))
|
|
//i2cBusMaster = 0 //SDA - pin 27 SCL - pin 28
|
|
//i2cBusMaster = 1 //SDA - pin 3 SCL - pin 5
|
|
//i2cLcdAddress = 60 // I2C display address in decimal and shifted. 60 == 0x78, 61 == 0x7A
|
|
//i2cLcdFlip = 1 // Rotate i2c LCD screen 180 degrees
|
|
//i2cLcdOnContrast = 127 // Allows you to adjust the contrast on your i2c LCD screen
|
|
|
|
//QuickBoot = 0 // faster startup
|
|
//ShowOptions = 0 // display some options on startup screen
|
|
//IgnoreReset = 0
|
|
|