dotfiles/Slic3rPE/printer/Malyan M200.ini

# generated by Slic3r Prusa Edition 1.40.0 on 2018-06-20 at 12:30:44
bed_shape = 0x0,120x0,120x120,0x120
before_layer_gcode = 
between_objects_gcode = 
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = 
default_print_profile = 
deretract_speed = 0
end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nG1 Y120 ; present bed\nM84 XY     ; disable motors\n
extruder_colour = ""
extruder_offset = 0x0
gcode_flavor = marlin
inherits = 
layer_gcode = 
max_layer_height = 0.30625
max_print_height = 115
min_layer_height = 0.0875
nozzle_diameter = 0.4
octoprint_apikey = 
octoprint_cafile = 
octoprint_host = 
parking_pos_retraction = 92
printer_model = 
printer_notes = 
printer_settings_id = 
printer_variant = 
printer_vendor = 
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 3
retract_length_toolchange = 10
retract_lift = 0.2
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 50
serial_port = 
serial_speed = 250000
single_extruder_multi_material = 0
start_gcode = G90                             ; Explicitly force absolute positioning in case it was not reset previously.\nG28     ; Home all axes.\nG29     ; Auto-level the bed.\nG0 X0 Y6 Z0.15 F9000    ; Move to the front-left part of the bed.\nG92 E0      ; Zero the extruder.\nG1 X60 E38 F220 ; Extrude a fat line of filament to prime and clean the nozzle.\nG92 E0      ; Zero the extruder minus restart offset\nG1 E-1.0 F500   ; Retract 1 mm.\nG1 X80 Y20 F9000    ; Sweep right to cut any strings.\n\n; Begin printing.\nG28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0