138 lines
4.9 KiB
Markdown
138 lines
4.9 KiB
Markdown
Alternative Controller for HHKB Pro
|
|
===================================
|
|
I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and
|
|
firmware source code is not open, of course. This means customizing this keyboard needs to replace original
|
|
controller with programmable one. This controller can work with HHKB Professional and Professional 2 model.
|
|
|
|
See [this thread][AltController] in geekhack.org.
|
|
|
|
[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
|
|
[AltController]: http://geekhack.org/index.php?topic=12047.0
|
|
|
|
|
|
##Features
|
|
* Customizable keymap
|
|
* More keymap layers(more Fn keys)
|
|
* Mouse keys
|
|
* USB NKRO
|
|
|
|
See README of [tmk_keyboard] for more.
|
|
|
|
[tmk_keyboard]: http://github.com/tmk/tmk_keyboard
|
|
|
|
###Pros
|
|
* No risks: Everything is all reversible
|
|
* No need for PCB trace patching, case cutting or any other destructive mod
|
|
* Can keep original controller intact
|
|
* Can change all HHKB behaviour as you like
|
|
|
|
###Cons
|
|
* Void your warranty
|
|
* Lose USB hub function of Pro2
|
|
|
|
##DISCLAIMER
|
|
I'm not a professional of electronics nor MCU programming. This may damage your HHKB.
|
|
And my English writing is poor, I'm not sure I can convey my notions accurately.
|
|
|
|
|
|
##Documents
|
|
See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HHKB and this controller.
|
|
|
|
|
|
##Build Firmware & Program
|
|
See [this document](../../doc/build.md) first.
|
|
|
|
### Configuration
|
|
Set `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`.
|
|
|
|
### Build
|
|
Just run make after intall tools.
|
|
|
|
$ make
|
|
|
|
Use `Makefile.pjrc` if you want to use PJRC stack instead of LUFA.(LUFA is recommended.)
|
|
|
|
$ make -f Makefile.pjrc
|
|
|
|
Use `Makefile.vusb` for [V-USB] controller.(not supported actively any more.)
|
|
$ make -f Makefile.vusb
|
|
|
|
### Program
|
|
First, push reset button on board to start bootloader.
|
|
|
|
This command programs the controller with [dfu-programmer] if the tool is intalled and configured properly.
|
|
|
|
$ make dfu
|
|
|
|
Or you can also use [FLIP] command to program. Also the tool should be intalled and configured properly. FLIP GUI app is also available.
|
|
|
|
$ make flip
|
|
|
|
Use [Teensy Loader] if your controller is Teensy/Teensy++.
|
|
|
|
|
|
##How to Customize
|
|
See [tmk_keyboard] documents.
|
|
|
|
|
|
##Hardware
|
|
You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with [V-USB] library is also cheapear option for DIY.
|
|
|
|
###1. TMK Alt Controller Board
|
|
TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project)](https://github.com/tmk/HHKB_controller).
|
|
See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923).
|
|
|
|
|
|
###2. PJRC Teensy++ 2.0 connection
|
|
+---------------+
|
|
| Teensy++ |
|
|
| |
|
|
| | HHKB pro HHKB pro2
|
|
| | ~~~~~~~~ ~~~~~~~~~
|
|
| PB0-2|------->ROW (6-8) (5-7)
|
|
| PB3-5|------->COL (9-11) (8-10)
|
|
| PB6|------->ENABLE (12) (11)
|
|
| PE6|<-------KEY (4) (3)
|
|
| PE7|------->PREV (5) (4)
|
|
| |
|
|
| | 5V--- (1-3) (1-2)
|
|
| | GND--- (13-14) (12-13)
|
|
+---------------+
|
|
|
|
- NOTE: PJRC [Teensy](http://www.pjrc.com/teensy/)
|
|
|
|
###3. V-USB connection
|
|
+---+ +---------------+
|
|
USB GND | | ATmega328p |
|
|
~~~ C3 | |
|
|
5V <-------+--------+---|Vcc,AVCC | HHKB pro pro2
|
|
R1 | | ~~~~~~~~ ~~~~
|
|
D- <----+--+-----R2-----|INT1 PB2-4|------->ROW (6-8) (5-7)
|
|
D+ <----|---+----R3-----|INT0 PC0-2|------->COL (9-11) (8-10)
|
|
Z1 Z2 | PC3|------->ENABLE (12) (11)
|
|
GND<----+---+-----------|GND PB0|<-------KEY (4) (3)
|
|
| PB1|------->PREV (5) (4)
|
|
| |
|
|
GND+-C2--+--|XTAL1 RXD|------->Debug Console
|
|
X1 | TXD|<-------Debug Console
|
|
GND+-C3--+--|XTAL2 RST|---SW--+GND
|
|
+---------------+
|
|
R1: 1.5K Ohm
|
|
R2,R3: 68 Ohm
|
|
Z1,Z2: Zener 3.6V
|
|
C1,C2: 22pF
|
|
C3: 0.1uF
|
|
X1: Crystal 12MHz
|
|
SW: Push Switch(for bootloader)
|
|
|
|
- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack.
|
|
- NOTE: [USBaspLoader] is very useful for firmware update.
|
|
|
|
|
|
[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
|
|
[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html
|
|
[dfu-programmer]: http://dfu-programmer.sourceforge.net/
|
|
[FLIP]: http://www.atmel.com/tools/FLIP.aspx
|
|
[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
|
|
[V-USB]: http://www.obdev.at/products/vusb/index.html
|
|
[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
|