678 B
678 B
SSD1306 OLED Display via I2C
Features
Some features supported by the firmware:
- I2C connection between the two halves is required as the OLED display will use this connection as well. Note this requires pull-up resistors on the data and clock lines.
- OLED display will connect from either side
Wiring
The wiring for i2c:
The pull-up resistors may be placed on either half. It is also possible to use 4 resistors and have the pull-ups in both halves, but this is unnecessary in simple use cases.
Work in progress...
OLED Configuration
Work in progress...