1
0
Fork 0
qmk_firmware/keyboards/zen/readme.md

21 lines
1.2 KiB
Markdown

# Zen Keyboard
A split ergo keyboard with a few goals in mind:
- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen is only 8.0mm thick.
- Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholinear, Atreus62, and Ergodox, this is the best layout for gaming and typing.
- RGB backlighting. 16 WS2812b LEDs shine through the perimeter switches. The SK6812 variant are cheap and easy to solder.
- Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume.
Keyboard Maintainer: [Legonut](https://github.com/Legonut)
Hardware Supported: Zen rev1
Hardware Availability: [RGBKB.net](https://www.rgbkb.net/)
A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://legonut.gitbooks.io/zen-keyboard/content/).
Make example for this keyboard (after setting up your build environment):
make zen/rev1:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.