2018-07-04 20:45:14 +00:00
# generated by Slic3r Prusa Edition 1.40.0 on 2018-07-02 at 11:01:10
2018-06-23 14:40:09 +00:00
bed_shape = 0x0,120x0,120x120,0x120
2018-06-20 10:22:16 +00:00
before_layer_gcode =
between_objects_gcode =
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile =
default_print_profile =
deretract_speed = 0
2018-07-04 20:45:14 +00:00
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG28 X0 ; home X axis\nG1 Y120 ; present bed\nM84 XY ; disable motors\n
2018-06-20 10:22:16 +00:00
extruder_colour = ""
extruder_offset = 0x0
gcode_flavor = marlin
inherits =
layer_gcode =
2018-06-23 14:40:09 +00:00
max_layer_height = 0.30625
max_print_height = 115
min_layer_height = 0.0875
nozzle_diameter = 0.4
2018-06-20 10:22:16 +00:00
octoprint_apikey =
octoprint_cafile =
octoprint_host =
parking_pos_retraction = 92
printer_model =
printer_notes =
printer_settings_id =
printer_variant =
printer_vendor =
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
2018-06-23 14:40:09 +00:00
retract_length = 3
2018-06-20 10:22:16 +00:00
retract_length_toolchange = 10
2018-07-04 20:45:14 +00:00
retract_lift = 0
2018-06-20 10:22:16 +00:00
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
2018-06-23 14:40:09 +00:00
retract_speed = 50
2018-06-20 10:22:16 +00:00
serial_port =
serial_speed = 250000
single_extruder_multi_material = 0
2018-07-04 20:45:14 +00:00
start_gcode = G90 ; Explicitly force absolute positioning in case it was not reset previously.\nG28 ; Home all axes.\nG29 ; Auto-level the bed.\nG0 X0 Y0 Z0.2 F9000 ; Move to the front-left part of the bed.\nG92 E0 ; Zero the extruder.\nG1 X60 E38 F220 ; Extrude a fat line of filament to prime and clean the nozzle.\nG92 E0 ; Zero the extruder minus restart offset\nG1 E-1.0 F500 ; Retract 1 mm.\nG1 X80 Y20 F9000 ; Sweep right to cut any strings.\n\n; Begin printing.\n
2018-06-20 10:22:16 +00:00
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0
